Motorcycle FAQ
A tensile force of about 30kg is needed to release the key ball to activate the airbag. Normally, the dismounting rider feels a strong tug to know that he/she has to disconnect the coiled wire before the airbag is activated. In fact, a small motorcycle or a scooter may topple over, if the rider forgets to disconnect the coiled wire before dismounting. Always disconnect the coiled wire before dismounting.
Yes, it can be reused if it has not been damaged. Replace the gas cartridge using the setting bolt and the hexagon wrench supplied with the Hit-air. If there is a damage to the airbag, ask an authorized dealer for a maintenance check.
The size (capacity) of the cartridge varies from model to model.
Make sure that the size(capacity) shown on the seal attached to the CO2 cartridge and that shown at the back of the key box cover are the same. (Some model has no size label attached)
Make sure that the size(capacity) shown on the seal attached to the CO2 cartridge and that shown at the back of the key box cover are the same. (Some model has no size label attached)
|
How to remove stains. | |||||
|
Yes, but be careful of its strap not to obstruct the free inflation of the airbag.
If possible, refrain from wearing them to avoid possible interference with the airbag to inflates |
The airbag inflates in full in 0.25 seconds to do its job, well before it is torn or damaged. (S-System : about 0.24 seconds, Ordinary System : about 0.5 seconds)
|
|
Police in Japan, Spain, China, Turkey, France and many other countries and districts are big users of Hit-air Airbag System for its safety and reliability. Because of increasing world-wide safety awareness, Hit-air Airbag System is now sold in more than 25 countries. |